Item 331342 -

Opslagbunker / Voorraadbunker met kantelaar / Bunker Bunkerstorage

Model:
Opslagbunker / Voorraadbunker met kantelaar / Bunker
Building year:
2025
Capacity:
5 Ton
Country:
Netherlands (the)
Price:
on request
Vat:
Excl. 21%
Optional extras
Discharging via transport-belt
Equipped with loading-chute(s)
Extras
Show translation Show original description
Bunker with length x width 2500x2500mm, capacity 8m³, on height adjustable legs tubes that slide into each other securing via pin/hole adjustment.
Sloping sides covered with soft landing. Above the belt a pressure divider (tunnel).

The outlet opening can be opened/closed via a valve. Bunker is equipped with grates to see the level in the bunker.

Tipper on bunker, hydraulically driven 2 double acting hydraulic cylinders. In speed adjustable. The tipper works via a rolling mechanism. This moves the box both forward and up during tilting. As a result, the bunker is filled nicely in the middle and the height is maximized. Tilts up to 170°! When tilting back can be chosen through a preselection switch to the box or not to shake.

Breaker in the bunker which automatically moves when the bunker is full / empty

The tipper is easily removable from the bunker and can be placed on any side. (As well as the fall breaker)

Black PVC bunker bottom belt 2900x500 (lxw) driven by geared motor with chain transmission. Dustproof non-contact plastic belt seal. Equipped with frequency control with a very wide range of speed. The belt can be taken out in its entirety under the bunker, for example to make the belt run to the other side.

On the non-outflow side, the bunker is equipped with an inspection hatch.

Bunker has scoop sleeves for moving by forklift.

Finish: Fully blasted and powder coated in RAL color of choice, standard RAL 7016 for the belt and tipper (anthracite) and RAL 6018 for the bunker (light green),

Options:

Remote control for the tipper
Photocell on top of bunker for automatic tipping back
Deflection sensor on end of belt
Belt with 2 rotation directions
Cap over tilter dust extraction


Movie:
Bunker met lengte x breedte 2500x2500mm, inhoud 8m³, op in hoogte verstelbare poten kokers die in elkaar schuiven borging via pen/gat verstelling.
Schuine zijden bekleed met soft landing. Boven de band een drukverdeler (tunnel).

De uitstroom opening is middels een klep te openen/sluiten. Bunker is voorzien van roosters om het niveau in de bunker te kunnen zien.

Kantelaar op bunker, hydraulisch aangedreven 2 dubbelwerkende hydrauliekcilinders. In snelheid regelbaar. De kantelaar werkt via een afrolmechanisme. Hierdoor beweegt de kist tijdens het kantelen zowel naar voren als omhoog. Hierdoor wordt de bunker mooi in het midden gevuld en wordt hij qua hoogte maximaal gevuld. Kantelt maarliefst 170° !!
Bij terugkantelen kan middels een voorkeuze schakelaar gekozen worden om de kist wel/niet te schudden.

Valbreker in de bunker die automatisch beweegt wanneer de bunker vol/leeg raakt

De kantelaar is eenvoudig demontabel van de bunker en kan aan iedere zijde geplaatst worden. (Evenals de valbreker)

Zwarte PVC bunkeronderband 2900x500 (lxb) aangedreven door een motorreductor met een kettingoverbrenging. Stofdichte contactloze kunststof bandafdichting. Uitgevoerd met frequentieregeling met een zeer groot bereik in snelheid. De band is in zijn geheel onder de bunker uit te halen, bijvoorbeeld om de banduitloop naar de andere zijde te maken.

Aan de niet uitloopzijde is de bunker voorzien van een inspectieluik.

Bunker heeft lepelkokers om met de heftruck te kunnen verplaatsen.

Afwerking: Geheel gestraald en gepoedercoat in RAL kleur naar keuze, standaard RAL 7016 voor de band en kantelaar (antraciet) en RAL 6018 voor de bunker (licht groen),

Opties:

Afstand bediening voor de kantelaar
Fotocel bovenop bunker voor automatisch terug kantelen
Afslagsensor op uiteinde van de band
Band met 2 draairichtingen
Kap over kantelaar stofafzuiging


Filmpje:
To make your visit to our website more efficient, the description of this offer will be automatically translated for you. However, mistakes in this translation can not be excluded. Tractors and Machinery is not responsible for any mistranslations.

Advertiser

Company:
RB Techniek B.V.
Name:
Ruud Borgijink
Street:
Bosrand 20
Zipcode:
8311 AS
City:
Espel
State / Region:
Nederland
Country:
Netherlands (the)
Int.Telephone:
Int. Fax:
Website:

Send advertiser a message:

(*) Required fields!