Trade Shows & Global News

New Develon dealer for Wales

Develon has appointed newly formed GOS Plant Services as its authorised dealer across key regions of Wales.Operating from a modern 30,000m² site at Blaenavon, South Wales, GOS will represent Develon across East and South Wales, as well as Pembrokeshire, Carmarthenshire, Powys and Ceredigion. In addition t...

Read more
Tuesday, 27 January 2026

Kuhn expands Multi-Longer range

Kuhn Farm Machinery has added a 6.1m model to its Multi-Longer range of hedge and verge cutters.Requiring a tractor weighing 5.5t, and a minimum of 100hp, the 6157 e-TPAL joins the 7457 e-TPAL as telescopic, left-handed machines, designed specifically for UK and Irish users. Expected to be a popular model,...

Read more
Monday, 26 January 2026

LAMMA 26: TAYLOR ATTACHMENTS

The Fortis Silage Compactor has been proving a hit for Bristol-based Taylor Attachments in Scandinavia. There are two working widths, 3.0m and 3.5m but other bespoke sizes are possible. While the drum measures 914mm in diameter, the outer rings are 1,258mm. Three baffles prevent the water ballast from sloshing left to ri...

Read more
Friday, 23 January 2026

LAMMA 26: Doyle Tornado

Having previously imported the Rolmako range of disc harrows, Engineering business Denis Doyle is now making its own cultivator onto which it can mount its range of seeders. The Tornado is initially being offered in working widths of 4.0, 5.0 and 6.0m.One of the key features is the cast leg design for the 560mm diameter,...

Read more
Friday, 23 January 2026

LAMMA 26: AgriWeld Agri-Press

The Agri-Press can be tooled up with discs or tines ahead of the two rows of interlocking rings. The latest machine from AgriWeld, its comes in working widths from 3.0m up to 8.0m.Starting at the front, there is a choice of two-rows of heavy-duty pigtail tines or you can have three-rows of shearbolt protected tines. Alte...

Read more
Thursday, 22 January 2026

LAMMA 26: AH Engineering automation

AH Engineering has added some simple electronics all to its rear discharge spreader, all aimed at making life easier on the operator and their machines even more dependable.Firstly, the horizontal beater/spreading disc machines now have hydraulic adjustment of the lower hood section. This allows users to alter the drop p...

Read more
Thursday, 22 January 2026

John Deere on top in 2024

John Deere topped the UK tractor chart in 2024 with 3,304 units and a 28.1% share of the 11,761-strong market.In second place was New Holland with 2,270 (19.3%) units, and third-placed Massey was the best performing AGCO brand with 1,295 tractors and an 11% share of the total market. The other top 10 spots...

Read more
Thursday, 22 January 2026

LAMMA 26: SlurryKat Elete

The Elete is a new top of the range tanker range from SlurryKat, ahead of its Premium Plus. The range includes single- (15m3), tandem- (22.7m3) and tri-axle (31.8m3) tanks.The spec sheet includes hydraulic drawbar suspension as well as height control. The pump has a new silencer, oil trap which is said to reduce noise le...

Read more
Thursday, 22 January 2026

LAMMA 26: Slurryquip engine pump

Slurryquip was launching this Stage V engine pumping rig at LAMMA last week. A four-cylinder, 188hp Caterpillar supplies the grunt to the Veneroni or Bauer pump. To ensure a reliable connection with the operator on the spreading tractor it has a full belt and braces approach – radio, GSM and satellite. There is a scree...

Read more
Wednesday, 21 January 2026

Linde branded Sennebogen telehandlers

Linde, the well-known forklift and materials handling manufacturer, has expanded its portfolio with two Sennebogen-made telehandlers.The Linde branded models, the YH40 (4.0t/7.7m) and YH60 (6.0t/8.5m), are the Sennebogen equivalents of the 340 G and 360 G, both of which have a high-lift cab. The Stage V Cummins engine in...

Read more
Saturday, 17 January 2026

LAMMA 26: Bateman sprayers revamp

Devon-based self-propelled sprayer specialist Bateman has given its entire line-up a revamp. From an operator’s point of view the most obvious upgrade is a completely new control layout with a customisable joystick surrounded by a rash of brightly back-lit buttons. Switching between road model and three field modes wit...

Read more
Friday, 16 January 2026

LAMMA 26: Standen SR300 cup planter

Spud kit specialist Standen had a new tunnel-type cup planter on display at the show. What apparently sets the new machine apart is its dual function cups that both singulate and cradle seed tubers as they are delivered to the ground. This in turn makes it possible to run the chains significantly faster so that forward s...

Read more
Friday, 16 January 2026

LAMMA 26: Slanetrac pivot handler

Best-known for its mini tracked dumpers and digger-mounted hedge-trimmers, Slanetrac is set to introduce a compact pivot-steer loader to its line-up.Fitted with a 20kW/27hp, three-cylinder Kubota engine and a 20km/hr two-range hydrostatic transmission, the H160 is built in China to the Irish firm’s particular specifica...

Read more
Friday, 16 January 2026

LAMMA 26: Rozmital trailed single

Czech company Rozmital had an array of grassland kit on its stand at LAMMA this week. Perhaps the most striking was this unusual-looking trailed single rotor rake. With a working width of 4.9m, it has apparently been designed for smaller tractors that might not have the lift capacity to handle a machine such size or the ...

Read more
Friday, 16 January 2026

Record low UK tractor regs

8,791 new 50hp+ agricultural tractors were registered in the UK in 2025 – 14% fewer than in 2024, and the lowest figure since AEA began monitoring registrations in the 1960s.Almost all power bands saw a decline in registrations but the biggest falls were at the top end of the power range. The number of 240hp+ tractors ...

Read more
Friday, 16 January 2026

Italian machinery market bucks the trend

After three years of sharp decline, the Italian tractor, telehandler and trailer markets showed signs of a recovery last year.FederUnacoma figures show that the tractor market grew by 13.7% to 17,573 units, a sizeable increase on the all-time low of 15,450 units in 2024. Registrations were sluggish in the first six month...

Read more
Thursday, 15 January 2026

More Manitou for Russells

Russells has expanded its Manitou area with responsibility for the former Farmstar Marr and Brigg territory.The newly acquired patch extends from North Sheffield eastwards through South Yorkshire and northern Lincolnshire to Grimsby, covering key agricultural centres including Barnsley, Doncaster, Gainsborough and Brigg,...

Read more
Wednesday, 14 January 2026

Kidd Farm Bushpig at LAMMA

Following its acquisition of WRAG post-drivers in March last year, Kidd Farm Machinery has added the Bushpig wire unroller to its portfolio at LAMMA today.As a front linkage mounted machine it can carry up to 1000m of standard stocknet or 400m of deer fence. Every imaginable function is controlled hydraulically from wire...

Read more
Wednesday, 14 January 2026

Unimog partner status for South Cave Tractors

Brough-based South Cave Tractors is the first Mercedes-Benz Trucks Unimog dealer in the UK to be awarded official Unimog partner status, a prestigious accolade held by only a handful of dealers worldwide.The rigorous accreditation process includes an on-site audit to assess showroom and workshop facilities, plus technica...

Read more
Tuesday, 13 January 2026

GB Tyres teams up with Alliance

GB Tyres now distributes the full Alliance agricultural and forestry tyre portfolio across the UK via its agricultural brand, Nordic Tyres.The result of a distribution agreement between the two companies, Graham Hutchison, commercial director at GB Tyres, says that this partnership represents a major step forward for Nor...

Read more
Tuesday, 13 January 2026

Wider spreading Agrispread models

The new AS3000 Series from Agrispread is designed to deliver wider spreading widths, higher application rates per hectare and faster working speeds.Its rear twin hydraulic folding conveyor feed twin disc spreader can achieve increased spread widths of up to 48m for urea, over 52m for mineral granular fertilisers and up t...

Read more
Sunday, 11 January 2026

Abbey industrial and slurry tankers

Visitors to the Abbey Machinery stand at next week’s LAMMA will be able to learn more about the company’s expanding industrial range.This includes bespoke engineering solutions for waste handling, bioenergy, and municipal applications — showcasing the company’s growing expertise and innovation beyond the agricult...

Read more
Friday, 9 January 2026

Alvan Blanch shows storage tech

Latest technologies on the Alvan Blanch stand at LAMMA include a DF dryer which can be supplied in mobile format for transporting between stores.The company will also show a vertical dust extraction system to allow for ease of installation within existing buildings. There will be a live demonstration of th...

Read more
Thursday, 8 January 2026

Storth King Cobra slurry pump

The King Cobra from Storth Machinery is a high-performance chopper slurry pump built for the toughest conditions.Its galvanised heavy-duty frame and powerful chopping mechanism are designed to handle thick, fibrous slurries with ease, reducing blockages and improving efficiency. Paired with the Jetter, it forms a hydraul...

Read more
Wednesday, 7 January 2026

Dual function Spead-a-Bale

Spread-a-Bale’s first ever dual function machine heading to LAMMA has a new head which combines feeding forage and straw spreading.Called the Combi-Bale, the system’s side mounted design is based on Spread-a-Bale’s HR straw spreading machine which features a head with one single horizontal rotor and the addition of...

Read more
Wednesday, 7 January 2026